[[ImgSrc-search]]
Contact Us
TEL: +86-755-89925302
Fax: +86-755-89929806
E-mail: sales@biadicable.com
Address: 1-5 Floors, No.2 Building, Tonglixing Industrial Park, No.8 Lanzhu East Road, Pingshan, Shenzhen, Guangdong
Home > News > Content
The Mainly System Cabling Tests For Network Cable
Feb 27, 2018

System cabling tests include permanent Link and Channel, which generally will choose FLUKE,IDEAL as a test equipment.

 

Permanent link and channel testing are the most common of all the test methods. They are also used when the project acceptance, reflecting the performance of the entire basic cabling. Permanent link does not contain equipment and user jumper, the maximum length of less than 90 meters. For example Cat6, in the test report provided by FLUKE Tester, the recorded test limit(test standard) is: TIA Cat6 Perm. Link.

1.png

Channel is the permanent link plus device and user jumper, the maximum length of less  than 100 meters. For example Cat6A, in the test report provided by FLUKE Tester, the recorded test limit (test standard) is: TIA Cat6 Channel.

2.png

In fact, the above two test methods include not only horizontal cables, but also connecting devices and soft jumpers at both ends of the cable, which may compensate each other during the test. They are ideal when validating the performance of the overall solution.