Contact Us
TEL: +86-755-89925302
Fax: +86-755-89929806
E-mail: sales@biadicable.com
Address: 1-5 Floors, No.2 Building, Tonglixing Industrial Park, No.8 Lanzhu East Road, Pingshan, Shenzhen, Guangdong
Home > News > Content
Crosslinked Wire & Cable Can Make The World Safer
Aug 23, 2018

What is Crosslinking?

By crosslinking, polymer chains are linked together by so-called cross-links. A three-dimensional polymer network is created where the molecules have been joined together into a new nonmeltable polymer system. Now, the polymer chains lose some of their ability to move as individual chains. The result is no melting.


What Crosslinking Can Do?

Crosslinked polymers offer more safety. A “simple PE” with a melting point of around 90°C to 110°C can easily withstand temperatures up to 250°C for several hours without melting—after it has been properly crosslinked.


Some of the advantages in relation to more safety and a greener environment include:


• No immediate melting means no immediate short circuits in areas like elevators, large public buildings like schools, theaters, airports, stadiums, ferries and so on.


• Reduced risk of damage by mechanical pressure and cut-through, no short circuits and electrical sparking.


• Improved oil and fluid resistance make the cables function longer during immersion.


• Improved stress crack resistance keeps electrical circuits and their functioning in place.


• Improved abrasion resistance, which can result in reduced wall thicknesses to save raw materials, space, energy and weight. A lower weight gives an extra premium in terms of lower energy consumption in trains, ships, planes and other transportation systems. What’s more, a lower fuel consumption means less CO2


• No dripping in case of fire, less flame spreading, less smoke, less pollution in case of fire (see www.inhol.com, Fire).


What Kind of Crosslinking Systems are Available?

For the wire and cable industry, three crosslinking systems are available:


• E-beam (irradiation) crosslinking

• C.V. (continuous vulcanization)

• Silane (moisture) crosslinking


E-beam technology: Ionizing energy, as provided by an accelerated electron beam (EB), is an efficient means of crosslinking polymers used for wire and cable insulation and jacketing. In this process, the three-dimensional unmeltable network is produced. This can be done without heat. E-beam processing is fast, good, controllable and in a lot of cases more economical than thermal and/or chemical crosslinking.


A smart solution for electron beam crosslinking has been introduced for smaller wires. This solution is a self-shielded E-beam allowing an easy installation in an existing facility. It integrates into one system the E-beam accelerator and the wire handling system, both of them being managed by a single PLC-based control system. Wires and cables that are wound on reels are fed into the E-beam and then, after electron beam treatment, are rewound onto take-up reels. This system can handle smaller cross sections and small wires. It can be installed almost anywhere in an existing facility.


Moisture crosslinking: Two moisture crosslinking processes are available. The first is the monorail technique, which is a single-step mixture of vinylsilane-peroxide, crosslinking catalyst and antioxidant into a polyolefin compound during a conventional extrusion process. The second is the sioplas process (a two-step process).  In the sioplas process, polyethylene is first grafted with a mixture of vinylsilane and peroxide with the purpose of obtaining a cross-linkable polyethylene. The material can be either processed directly or stored in dry conditions for up to several months.


In both applications, the finished product is moisture-cured (water bath or steam sauna) or ambient cured. Each of these crosslink systems has their pros and cons. How to Choose the Right System? In case you are considering crosslinking, you have to make a decision how to crosslink. Are you going for E-beam, CV or chemical? Depending on volumes, you might consider inhouse crosslinking or decide to contact an E-beam processing service provider.


By E-beam, the widest range of polymers can be commercially crosslinked. The number of polymers that can be crosslinked by CV lines, chemically and moisture systems is restricted.  There is a permanent requirement for quality control in the wide spectrum of crosslinked products to check custom designed material characteristics. The hot-set test (hot-creep) method is effective in determining the degree of crosslinking within 15 minutes. Alternatively, a gel-sol test method can be used. This system requires much more time. There is a direct correlation between the fast and reliable hot-set method and the gel-sol content test.


Conclusion:

The global industry is moving forward to more crosslinking and this will lead to more safety around the world. The installation of crosslink systems shows a steady, but modest growth in the USA and Europe. In the Middle East, we see more progression and in the Far East, the installation of crosslink lines is still growing dramatically. If the world cares about more safety, the industry should think about “Crosslinking”.

By inhol.com