Contact Us
TEL: +86-755-89925302
Fax: +86-755-89929806
E-mail: sales@biadicable.com
Address: 1-5 Floors, No.2 Building, Tonglixing Industrial Park, No.8 Lanzhu East Road, Pingshan, Shenzhen, Guangdong
Home > News > Content
Coaxial Cable Size Identification
Dec 13, 2018

Coaxial cabling is the means by which millions of people receive various services. From digital television to Internet to phone service, cable has become a major medium in the multibillion-dollar telecommunications industry.


Construction

All coaxial cable is made up of three major components. The first is the outer sheath normally made from thin PVC. Next is the white inner dielectric which acts as an insulator for any electrical energy. Lastly is the inner copper conductor sometimes referred to as the stinger? This is not in reference to the electricity, which is negligible and cannot do any harm. It refers to the way it looks when it's stripped away for a fitting.


Shielding

Another component included in modern coaxial cable is shielding. This surrounds the dielectric preventing the emanation of energy from the cable and also acts as an outer conductor.


Types

There are several types of coaxial cable, designated by the prefix RG. The original definition of the prefix stems from the military specification which meant "radio guide." Today it's a general term for coaxial cable.


Three common types of coaxial cable are in use today: RG-59, RG-6, and RG-11.


RG-59

RG-59 is the thinnest of the three. It was formerly used to carry video signals for cable systems and can be found as dual units that could be easily separated. This is for when cable channels had an A and B switch. The inner conductor is made of copper-planted steel. The dielectric is 3.7 mm in diameter. The outer conductor is a braided bare copper wire which covers 95 per cent. The outer diameter is 6.15 mm.


RG-6

RG-6 is the standard that cable and satellite companies utilize. The inner conductor is bare copper. The dielectric is 4.6 mm with an outer conductor made of aluminium polyester foil surrounded by a tin copper braid. The outer conductor coverage is 100 per cent for the foil and 61 per cent for the braid. the outer diameter is 6.9 mm.


RG-11

RG-11 is used for when the cable tap is a very long distance from the residence. It is easily identifiable as it is a very thick cable (and hard to work with). The insulation diameter is 7.24 mm and the outside diameter is 10.3 mm. The inner components are generally made of the same material as the the RG-6.


Remark: Quoted from Jacob Workman